Solutions

Pump - Electric Hydraulic

Electric hydraulic pumps in our range include low pressure hydraulic pumps (69-170bar / 2,250PSI), high pressure hydraulic pumps (700bar / 10,000PSI) and very or ultra high pressure hydraulic pumps (1,000-2,000bar 14,500-29,000PSI). Most are single phase 230VAC/50Hz but some larger units are 3 phase (415VAC). Available as single acting, double acting, split flow units capable of split combinations up to 8 way . Manual control or solenoid control valves standard or optional on some units. Electric units almost always feature stepped down pendant control (DC voltage) for safety.

Alternate terminology: Hydraulic Electric Pumps, 230VAC/50Hz 415VAC/50Hz Electric Hydraulic Pumps, Electrically Powered Hydraulic Pumps.

Solution Durapac Cylinders - Im-press-ive System

The Problem:A heavy vehicle alignment group customer that provides professional and engine...

Solution Durapac Hydraulic: 3,2,1 Bridge Launch

The Problem:This project was for a bridge launching system where 4 by RSLC-1504 Durapac cy...

Solution Durapac Hydraulic: DANGER (Overhead) High Voltage!

The Solution:For this transformer change out four RG-258 Durapac 25 ton cylinders with sta...

Solution Durapac RPLC Series Low Profile Hydraulic Cylinders: Bearing Under the Bridge

At the abutment end of a road bridge, three bearings had to be replaced which supported th...

Solution Durapac Split Flow Pump: Levelling Up

The supporting structural steel columns underneath a multi story building needed to be rep...

Solution Durapac Torque Wrenches: Out at Site, Out at Mine

The Problem:A solution was needed at a mine site regarding the bolting application on the ...

Solution Izumi Hydraulic Crimpers & Dies: Keep the Door Rolling

A garage door manufacturing company contacted us for a crimping solution. They provide and...