Solutions

Cylinder - High Pressure Hydraulic

High pressure hydraulic cylinders are used for many industrial purposes such as lifting or jacking, pushing, pulling or pressing. Capacities range from 4.5 tonne (5 ton) to 1,451 tonne (1,600 ton). For: lifting and jacking purposes cylinders are available with locking collars; for pulling applications hollow cylinders are available with internal female thread or pull cylinders with clevis ends (removable for range of other accessories). Most cylinders are available in single acting (spring return) or double acting (hydraulically driven return). Hydraulic hand or powered pump (electric/petrol/diesel) is required to operate cylinders.

Alternate terminology: High Pressure Hydraulic Jacking / Lifting Cylinders, High Pressure Hydraulic Cylinder Rams, High Pressure Hydraulic Pull Cylinders.

Solution Durapac Cylinders - Im-press-ive System

A heavy vehicle alignment group customer that provides professional and engineering soluti...

Solution Durapac Hydraulic: DANGER (Overhead) High Voltage!

For this transformer change out four RG-258 Durapac 25 ton cylinders with stabilising base...

Solution Durapac RD Series Double Acting Cylinders: Out with the Old, In with the New

A Durapac RD-5013 Cylinder was used to assist in the removal and replacement of old pipes ...

Solution Durapac RG Series Single Acting Cylinders & P-Series Manually Operated Pumps: A Levelling Act

Our customer had an assembly and disassembly bench used for the maintenance of hydraulic c...

Solution Durapac RPLC Series Low Profile Hydraulic Cylinders: Bearing Under the Bridge

At the abutment end of a road bridge, three bearings had to be replaced which supported th...

Solution Durapac Split Flow Pump: Levelling Up

The supporting structural steel columns underneath a multi story building needed to be rep...