Remote controlled (via foot switch) pneumatic cable cutter for cutting copper and aluminium cable to 20mm (3/4") diameter. NOT FOR CUTTING STEEL.
Includes foot switch and table mounting brackets.
Long life cutting blades are manufactured from tough and durable hardened and ground alloy steel.
This is a guillotine-type cutter used for production cutting of non-ferrous cables up to 20mm (3/4") diameter. It makes quick work of any high production job with a cutting cycle of about 1 1/2 seconds.
|Air Consumption per cut||1.5 cubic foot (.42 cubic metre) @ 150PSI (1035kpa)|
|Air pressure||175 PSI (1207kpa) maximum|
|Inlet Connection||1/4" NPT Female|
|Weight||Approx 5.20kg (11.5lbs)|
|Jaw Opening||3.17cm (1.25")|
|Copper, Aluminium and Telecommunications cable||Up to 3/4" (20mm)|
|Soft Bolts||DO NOT CUT|
|Wire Rope||DO NOT CUT|
|Rebar, Ground Rod, Anchors||DO NOT CUT|
|ACSR||DO NOT CUT|
|Guy Strand||DO NOT CUT|
|Replacement Blades||#3917 / #3916 anvil|
$2,850.00 (ex GST)
We have 1 left in stock.
Email us about this product
Or call Melbourne on (03) 9761 4199