Page 4 - Durapac_2016
P. 4
sync
MASTER
SYNCHRONOUS LIFT SYSTEM WWW.DURAPAC.COM
a SyncMaSter – is a computEr coNtroLLED, hyDrauLic LiftiNG systEm that proviDEs thE
hiGhEst DEGrEE of safEty to pErsoNNEL aND propErty associatED with LarGE-scaLE
ENGiNEEriNG / maiNtENaNcE projEcts.
SPECIALTY LIFTING SYSTEMS
Parameters within the lifting system can be set to ensure that the lift does not proceed outside a predetermined lift plan. SyncMaster
can in real time monitor and calculate cylinder loads, stroke lengths, total loads and the centre of gravity – all of which will provide the
operator with an alarm and automatically stop the lift from continuing should they exceed set parameters. The centre of gravity feature
is a function that defines a programmable rectangular or circular boundary outside of which the centre of a mass cannot move. If the
centre of mass approaches this boundary, an alarm is given and the lift stops automatically. This is a key safety design feature for
use in the movement of tall or unevenly loaded structures. SyncMaster allows for precision control and monitoring of complex lifting
applications. Every configuration, process, alert and operator function is displayed and recorded in real time, thus reducing the costly
overheads associated with manual control, measurements and comparisons to lift plans. All lift and alert data is collected during the
lift process and this data can easily be exported to an application for analysis and planning of future lifts.
4
